Lcd Backlight Replacement; Tools Required; Removal Procedure; Replacement Procedure - Agilent Technologies ENA Series Service Manual

LCD Backlight Replacement

Tools Required

• TORX screwdriver, T10, T15, and T20
• Flat edge screwdriver

Removal Procedure

Refer to Figure 6-17 for this procedure.
Step 1. Remove the A51 LCD display as described in"A51 LCD Display Replacement" on
page 191.
Step 2. Push the stopper (item 1) and slide the backlight as shown in Figure 6-17.
Figure 6-17 LCD Backlight Removal

Replacement Procedure

Step 1. Reverse the order of the removal procedure.
Chapter 6
Replacement Procedure
LCD Backlight Replacement
193