Organization of Service Guide
Tabs are used to divide the major chapter and appendix of this manual. The contents of
each chapter and appendix in this manual is as follows;
Chapter 1 , "General Information,"
The Service Guide is a guide to servicing the E5061A/E5062A RF Network
Analyzer. The guide contains information requisite to do performance tests,
adjustments, troubleshooting, and repairs.
Chapter 2 , "Performance Tests,"
This chapter provides information on how to verify the E5061A/E5062A
performance.
Chapter 3 , "Adjustment,"
This chapter provides the adjustment information for the E5061A/E5062A to ensure
that it is within its specifications. The adjustment must be performed Agilent's
qualified service personnel. If you need the adjustment for your E5061A/E5062A, it
should be sent to the nearest Agilent Technologies service office.
Chapter 4 , "Troubleshooting,"
This chapter provides the procedure to isolate a faulty assembly in the
E5061A/E5062A.
Chapter 5 , "Replaceable Parts,"
This chapter contains information for ordering replacement parts for the
E5061A/E5062A.
Chapter 6 , "Replacement Procedure,"
This chapter provides procedure for removing and replacing the major assemblies in
the E5061A/E5062A.
Chapter 7 , "Post-Repair Procedures,"
This chapter lists the procedures required to verify the E5061A/E5062A operation
after an assembly is replaced with a new one.
Appendix A , "Manual Changes,"
This appendix contains the information required to adapt this manual to versions or
configurations of the E5061A/E5062A manufactured earlier than the current printing
date of this manual. The information in this manual applies directly to
E5061A/E5062A units with the serial number that is printed on the title page of this
manual.
Appendix B , "System Recovery,"
This appendix describes how to recover the operating system (Windows 2000) when
the operating system has been damaged.
Appendix C , "Firmware Update,"
Chapter 1
General Information
Organization of Service Guide
15