Agilent Technologies ENA Series Service Manual page 209

Step 6. The following screen appears. Check that Floppy is selected (highlighted) (if Floppy is not
selected, select it with
Step 7. The message as shown below appears. Press
create user backup image, press
Agilent Technologies System Utilities
Recovery & Backup Options for the E5061/62A
Choose One of the following:
_________________________________________________________________
1. Recover Factory Backup Image
2. Create User Backup Image
3. Recover User Backup Image
4. Exit
_________________________________________________________________
Enter a Choice: _
NOTE If the above message does not appear, the instrument or the disk for the system recovery is
at fault; contact your local Agilent customer center listed at the end of this manual or
distributor.
Appendix B
of the keyboard), and press
of the keyboard. If you want to cancel the
here.
System Recovery
System Recovery
of the keyboard.
209