Control Panel Temperature And Mounting Angle - Mitsubishi Electric GOT SIMPLE Series Operation Manual

Hide thumbs Also See for GOT SIMPLE Series:
Table of Contents

Advertisement

18.4

Control Panel Temperature and Mounting Angle

When mounting the main unit to a control panel or similar fixture, set the GOT display section as shown below.
Horizontal installation
When the temperature inside the control panel is 40 to 50°C, the mounting angle should be in the range from 60 to 105
degrees.
GOT
display
section
Control panel,
etc.
The GOT will have a longer lifetime if used within the mounting angles shown above.
Ideally, the temperature inside the control panel should not exceed 0 to 40°C.
Vertical installation
When the temperature inside the control panel is 40 to 50°C, the mounting angle should be in the range from 60 to 105
degrees.
GOT
display
section
Control panel,
etc.
The GOT will have a longer lifetime if used within the mounting angles shown above.
Ideally, the temperature inside the control panel should not exceed 0 to 40°C.
18 INSTALLATION
166
18.4 Control Panel Temperature and Mounting Angle
GOT
back panel
GOT
back panel
105°
60°
105°
60°

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs25Gs21

Table of Contents