Searching Commands/Devices - Mitsubishi Electric GOT SIMPLE Series Operation Manual

Searching commands/devices

Displays a command or device by searching it in sequence program from Step 0.
Command search
■Operation
Select the command
MODE
to search for.
(Read mode)
*1 If the command you want to search for is not on the keyboard, touch the
When searching for an applied instruction, touch the
When searching for a label, touch
Page 361 Writing commands
*2 Input only when searching for commands requiring a device name and device number.
*3 After the search results are displayed, you can continue searching with the same conditions by touching the
GO
other than the key ends the search.
■Example
Searching for LD M8000
< WRITE >
MODE
< READ >
(
Select the command
LD
to search for.
Pointer (P, I) searches
For pointer searches, only labels are searched.
Pointers specified as operands in applied instructions are not searched.
*1
Input the device name and
device number.
FNC
key and input the applied instruction number.
P I
or and input the pointer number.
Search command
3
Set the
READ mode.
8 LD
9 OUT
12
)
24
25
28
*2 *3
GO GO
MORE
key to switch to the other keyboard.
LD
MOV 12
M 8 0 0 0
M 8000
T 10
K 100
LD X 002
(Continue to search with the
GO
same conditions)
LD M 8000
OUT T 0
K 100
OUT T 1
28 GOT SELF CHECK (DEBUG)
GO
key. Touching any key
GO
359
28.2 FX List Editor
28