Installing And Removing The Battery; Installing The Battery - Mitsubishi Electric GOT SIMPLE Series Operation Manual

7.6

Installing and Removing the Battery

The following shows the procedure for installing and removing the battery.
(Described with the GOT rear face facing up.)
• Battery
The GOT comes with a battery in the battery holder.
Before using the GOT, connect the battery connector to the GOT connector.
• Battery replacement time
To replace the battery, leave the GOT on for more than 10 minutes before replacing the battery.
Replace the battery within 5 minutes.

Installing the Battery

Install a battery to the GOT before the first startup.
GS2512-WXTBD
The following shows the procedure for installing the battery.
1.
Make sure that the GOT power is off.
2.
Install the battery to the GOT rear face.
Open the battery cover as shown below.
Battery cover
3.
To replace the battery, remove the old battery, and then disconnect the connector.
For information on how to remove the battery, refer to the following.
Page 74 Removing the Battery
7 INSTALLATION AND REMOVAL
72
7.6 Installing and Removing the Battery