Mitsubishi Electric GOT SIMPLE Series Operation Manual page 319

■FX CPU
Item
Parameter
Device comment
Sequence program
*1
Special program
File register
*2
Extension file register
*3
Built-in CC-Link/LT setting
*1
Special parameter
*1 The data can be backed up or restored with the FX3U(C) series and FX3G(C) series only.
*2 The data can be backed up or restored with the FX3U(C) series only.
*3 The data are stored in the FX3U-32MT-LT-2 only.
■Data for software
Item
Label program
Symbolic data
Source Simple project (with label)
information
Structured project
New source Simple project (with label)
information
Structured project
Backup data
■Storing backup data
When backups for the same channel are executed several times, the backup data is overwritten by SD card.
■Storage location for backup
Backup data are stored in a SD card with the following folder structure.
SD card
BACKUP
SYS1BKUP
YYMMDDXX
SYS2BKUP
■Folders for backup data
Backup data are stored by the folder, and a folder name (YYMMDDXX) is set as follows.
YYMMDDXX
00 (fixed)
Backup date (01 to 31)
Backup month (01 to 12)
Backup year (the last two digits of the year)
Description
Parameter for operating a programmable controller
Device comment to be stored in a programmable controller
Program that the CPU operates
Positioning setting/Initial value parameter
Data stored in file registers
Data stored in extension file registers
CC-Link/LT parameter
Special adapter/special block parameter saved in the main unit
Description
Data for GX Developer
Symbolic data for PX Developer
GX Works2 data
GX Works2 data
GX Works2 data
GX Works2 data
SD card in the drive set as the storage location for backup data
Folder for storing backup data
27 CONTROL OF VARIOUS DATA (DATA CONTROL)
27.8 BACKUP/RESTORE
File name
INFO.FPG
File name
PROJINFO.CAB
#FBDQINF.BIN
SRCINFOM.CAB
SRCINFOM.C32
SRCINFOI.CAB
SRCINFOI.C32
SRCINF1M.CAB
SRCINF2M.CAB
SRCINF1M.C32
SRCINF2M.C32
SRCINF1I.CAB
SRCINF2I.CAB
SRCINF1I.C32
SRCINF2I.C32
317
27