7.3
Installation Position
To install the GOT, some distance is required between the GOT and the other devices.
GS2512-WXTBD
Depending on the units and cables used for the GOT, the distance more than the described dimensions may be required.
Install the GOT with consideration of the connector dimensions and the cable bend radius.
For the vertical installation, install the GOT so that the vertical installation arrow printed on the GOT rear face points upward.
Page 51 PART NAMES AND SETTINGS
B
C
A
Horizontal
D
C
Vertical
D
Panel thickness: 1.6 mm to 4 mm
A
Panel thickness: 1.6 mm to 4 mm
(0.06 to 0.16inch)
E
(0.06 to 0.16inch)
E
7 INSTALLATION AND REMOVAL
7.3 Installation Position
7
67