System Configuration - Mitsubishi Electric GOT SIMPLE Series Operation Manual

System configuration

This section describes the system configuration for the backup/restore function.
For connection type settings and precautions regarding the communication unit/cable and connection type, refer to the
following.
GOT2000 Series Connection Manual (Mitsubishi Products) for GT Works3 Version1
Target controller
Controller
MELSEC iQ-F
QCPU (Q mode)
LCPU
*2
FX CPU
*1 Use a PLC CPU with the function version of B or later.
*2 To restore the backup data containing a special parameter, use the following version of CPU.
· FX3U(C) version: 3.10 or later· FX3G(C) version: 2.00 or later
Connection type
This function can be used in the following connection types.
( : Applicable, : Partly restricted,
Function
Name Description
Backup/restore Backs up setting data for a controller connected to the GOT and restores
the data to the controller.
*1 When the GOT is connected to LCPU, use L6ADP-R2.
*2 Backup/Restore cannot be used when using CC-Link IE field network Ethernet adapter.
*3 The restoration cannot be performed to a QCPU with the factory-settings or whose memory is formatted.
Required hardware
The backup / restore, SD card is required.
27 CONTROL OF VARIOUS DATA (DATA CONTROL)
314
27.8 BACKUP/RESTORE
*1
Basic model
*1
High performance model
Universal model
: Inapplicable)
Model
FX5U, FX5UC, FX5UJ
Q00JCPU, Q00CPU, Q01CPU
Q02CPU, Q02HCPU, Q06HCPU, Q12HCPU, Q25HCPU
Q00UJCPU, Q00UCPU, Q01UCPU, Q02UCPU, Q03UDCPU, Q04UDHCPU,
Q06UDHCPU, Q10UDHCPU, Q13UDHCPU, Q20UDHCPU, Q26UDHCPU,
Q03UDECPU, Q04UDEHCPU, Q06UDEHCPU, Q10UDEHCPU,
Q13UDEHCPU, Q20UDEHCPU, Q26UDEHCPU, Q50UDEHCPU,
Q100UDEHCPU, Q03UDVCPU, Q04UDVCPU, Q06UDVCPU, Q13UDVCPU,
Q26UDVCPU
L02CPU, L06CPU, L26CPU, L26CPU-BT, L26CPU-PBT, L02CPU-P,
L06CPU-P, L26CPU-P, L02SCPU, L02SCPU-P
FX0, FX0S, FX0N, FX1, FX2, FX2C, FX1S, FX1N, FX1NC, FX2N, FX2NC,
FX3U, FX3UC, FX3G, FX3GC, FX3S
Connection type between GOT and controller
Direct CPU
connection
(serial)
*1
Serial Ethernet
communication connection
connection
*3 *2*3