Information Displayed On The Device Monitor Screen And Key Functions - Mitsubishi Electric GOT SIMPLE Series Operation Manual

Information displayed on the device monitor screen and key
functions
Device monitor screen
The information displayed on the device monitor screen is described below.
(1) (2) (4) (3)
(6)
(7)
No. Item
1) Device name
2) Device No.
3) Bit device ON/OFF
Timer/Counter contact ON/OFF
4) Data type
5) Present value of word device
Present value and set value of timer/
*1
counter
6) Counting method
7) Reset coil ON/OFF
8) N/W
9) ST
10) CPU No.
28 GOT SELF CHECK (DEBUG)
338
28.1 Device Monitor Function
(8) (5) (9) (10)
Settings
Displays the device name.
Displays the device number.
Displays ON/OFF information of bit devices and timer/counter contacts
: ON : OFF
DW: Indicates that the device value is a 32-bit (two-word) module.
Nothing displayed: Indicates that the device value is a 16-bit (one-word) module.
[Decimal number]
16-bit (one-word) module: Six digits (including a digit for a sign) are displayed. (Display example: -12345)
32-bit (two-word) module: Ten digits (including a digit for a sign) are displayed. (Display example: -123456789)
[Hexadecimal number]
16-bit (one-word) module: Four digits are displayed. (Display example: H AB12)
32-bit (two-word) module: Eight digits are displayed. (Display example: H ABCDE123)
Displays the counting method when registering the counters from C200 to C255.
UP: Up count mode
Displays the reset coil state when registering the timer/counter for the FXCPU.
: ON : OFF
Sets or displays the network No. when the PLC is on the network.
Sets or displays the station No. when the station No. is assigned to the PLC.
0 to 4: This item must be set only when the GOT is connected to the Q series CPU in the multiple CPU system
or QnUCPU.
Changing the CPU No. cancels the registration for all the devices.
Page 341 Device registration
DOWN: Down count mode