Cleaning Method - Mitsubishi Electric GOT SIMPLE Series Operation Manual

33.3

Cleaning Method

Use the GOT always in a clean condition.
Cleaning and disinfecting the GOT
• For your safety, be sure to turn off the GOT before cleaning and disinfecting the surface.
• Carefully wipe the GOT screen with a soft cloth moistened with neutral detergent or ethanol.
Do not apply too much disinfectant to the cloth.
If you use alcohol for disinfection, the main component of the alcohol must be ethanol or isopropyl alcohol.
• Do not spray disinfectant directly to the GOT because doing so may cause electrical failure of the GOT and peripheral
devices.
• After wiping the surface, dry the GOT completely before turning it on.
For the display operation of the [Clean] screen, refer to the following.
Page 387 Clean
Precautions
Do not use the following solvents.
Solvents may deform the protective sheet, dissolve the surface, or peel the paint on the surface.
• Chlorine-based cleaners (bleach or other solvents)
• Peroxides (including hydrogen peroxide)
• Acetone, ammonia, paint thinner, benzene, methylene chloride, toluene, or other solvents
Clean
33 MAINTENANCE AND INSPECTION
33.3 Cleaning Method
33
397