Mitsubishi Electric GOT SIMPLE Series Operation Manual page 10

[PRECAUTIONS FOR USING A DATA STORAGE]
WARNING
● If the SD card is removed from drive A of the GOT while being accessed by the GOT, the GOT may
stop processing data for about 20 seconds.
The GOT cannot be operated during this period. The functions that run in the background including a
screen updating, alarm, logging, scripts, and others are also interrupted.
This stop affects the system operation, causing an accident.
Before removing the SD card, check the following items.
[GS25]
Check that the SD card access LED is off before removing the SD card.
[GS21]
Disable the SD card access in the GOT utility, and then check that the SD card access LED is off
before removing the SD card.
[PRECAUTIONS FOR USING A DATA STORAGE]
CAUTION
● Do not remove the data storage from the GOT while the data storage is being accessed by the GOT,
or the data storage and files may be damaged.
Before removing the data storage, check the SD card access LED, relevant system signal, or others
to make sure that the data storage is not being accessed.
● Turning off the GOT while it accesses the SD card results in damage to the SD card and files.
● When using the GOT with an SD card inserted, check the following items.
[GS25]
After inserting an SD card into the GOT, make sure to close the SD card cover.
Otherwise, data cannot be read or written.
[GS21]
After inserting an SD card into the SD card unit, make sure to enable the SD card access in the GOT
utility.
Otherwise, data cannot be read or written.
● When removing the SD card from the GOT, make sure to support the SD card by hand as it may pop
out. Not doing so may cause the SD card to drop from the GOT, resulting in a failure or break.
● When inserting a USB device into a USB interface of the GOT, make sure to insert the device into the
interface firmly.
Not doing so may cause a malfunction due to poor contact.
● Before removing the data storage from the GOT, follow the procedure for removal on the utility screen
of the GOT. After the successful completion dialog is displayed, remove the data storage by hand
carefully.
Not doing so may cause the data storage to drop from the GOT, resulting in a failure or break.
8