Device Registration - Mitsubishi Electric GOT SIMPLE Series Operation Manual

Device registration

The following explains the procedures for device registration.
Connecting to a Q series CPU
in the multiple CPU system or QnUCPU
Specify the CPU No. of the device
to be registered when connecting
the GOT to a Q series CPU in the
multiple CPU system or QnUCPU.
Input the CPU No. with the
ten-key, and then touch the
ENT key.
Touch the DEV key.
Set 1) to 3) by using the keyboard,
and then touch the ENT key.
The device registration is
completed.
For the keyboard operations, refer to the next page.
No. Item
1) Data type
2) Device name
3) Device No.
Device monitor
Touch
Touch
1) 2) 3)
Keyboard
Settings
32: Indicates that the device value is a 32-bit (two-word) module.
Nothing displayed: Indicates that the device value is a 16-bit (one-word) module.
Set the device name and device number to be monitored.
Connecting to a CPU
other than the Q series
CPU in the multiple CPU
system and QnUCPU
When registering multiple
devices, repeat the
procedures.
28 GOT SELF CHECK (DEBUG)
28.1 Device Monitor Function
28
341