Mitsubishi Electric GOT SIMPLE Series Operation Manual page 382

28 GOT SELF CHECK (DEBUG)
380
28.3 FX3U-ENET-ADP Communication Setting Function
5.
When the screen shown on the left appears, the
changed communication set value of the FX3U-
ENETADP is written normally to the CPU. To enable the
setting, power OFF the CPU, and then power it ON
again. Change the setting of the subnet mask pattern
and default router IP address using the same procedure
if necessary. An error message appears in the following
cases. Touch the
perform the setting procedure again.
When the CPU is running
The following error message appears. Stop the running
status of the CPU.
When a communication error occurs
Set the communication between the GOT and the CPU to the
normal status.
When the memory cassette is write-protected
Set to OFF the write-protect switch of the memory cassette.
When writing to the CPU is protected by the keyword
Clear the protection by the keyword against writing.
key to return to the step 1., and