Table of Contents
Advertisement
Test Points Configuration
2.3.4.
The Interconnection Panel has a number of analog and TTL test points, as described in the table above.
Depending on the software licenses, some of these test points may be disabled.
For instance, a standard CORTEX machine for station keeping operations (low bandwidth uplink and downlink),
the
following
«
Moreover, for a multi-mission machine with high data bandwidth requirements for the TMU, TMS or/and the TCU,
the available tests points are the full sets of test points (SET # 1 to SET # 4), for input & output from/to high
bandwidth functional units.
Refer to Annex 5 (section 1.5) for test points assignment in your machine.
© Safran Data Systems
COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
Video
test
points
»
VIDEO 1 & VIDEO 2 (analog out)
Sts Out/J25 to J28 (TTL, 50 Ω buffered)
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
only
are
available
(see
Safran Data Systems
.
Ref.
DTU 100042
Is.Rev.
5.17
Date:
Dec.
03, 2021Sept. 30, 2021
next
table
for
more
Page 12
details):
Advertisement
Table of Contents
