Safran CORTEX CRT Quantum User Manual page 56

Satellite Commanding (High Bandwidth Mode)
1.6.6.

Supported commands

PCM coding

Convolutional coding

Modulation

Bit rate

Sub-carrier frequency

Idle pattern

Preamble length

Preamble length

Pause duration

Local TC capability
The following restrictions apply to the capabilities of the High Bandwidth TCU:

TC Scrambling is not supported

FSK modulation at baseband is not supported

Execute instruction is not supported

Data+Execute request is not supported
© Safran Data Systems
COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
Clear TC message transmission
Pause instruction, Grouped instructions
TC message transmission at programmed time
Last radiation time request
Idle pattern generation
as per LBW mode
Yes
BPSK or no sub-carrier (direct PCM on the carrier)
100 bps to 1 Mbps (direct PCM on the carrier)
100 bps to 250 kbps (PCM on a sub-carrier)
5 kHz to 2 MHz
as per LBW mode
as per LBW mode
as per LBW mode
as per LBW mode
as per LBW mode.
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec. 03, 2021Sept.
30, 2021
Page 31