Table of Contents
Advertisement
where �� is the code rate and �� the information block length in bits.
In File mode, the information data blocks (and only them) have to be provided in the selected file. Moreover, it is
possible to repeat the encoding of several consecutive blocks. In this case, the TMS Format Length has to
match the several frames which have to be encoded, and so to be configured to the value corresponding to the
TMU Frame Length times the number of encoded blocks (Hence, in this case, the TMS format length is
expressed in bits too). In this case the data shall be organized in the file according to the following structure:
© Safran Data Systems
COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
Uncoded information data block #1
Uncoded information data block # 2
Uncoded information data block # N
Figure 63: TMS File structure for Turbo encoding
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Safran Data Systems
.
Ref.
DTU 100042
Is.Rev.
5.17
Date:
Dec.
03, 2021Sept. 30, 2021
Page 125
Advertisement
Table of Contents
