Table of Contents
Advertisement
2.3.3.1.4. Configuration S107583 : Agencies / AIT 4U with EFC
The
connection
Directly at the rear panel for the 2 RF outputs and 3 RF inputs of the EFC board with SMA
connectors
Through the Interconnection Panel described in 2.3.1.2 for the other signals (Uplink IF Alternates,
Downlink IF Alternates, AGC out, Video out, reference frequencies and TTL signals)
The computer connections (LAN, VGA, RS232) are directly available on the Industrial Computer rear panel.
The picture below lists and identifies the various connections to the computer ports, and the I/O connectors of the
Cortex CRT Quantum dedicated hardware
Figure 15: IS00427 Rear panel Connectors with BNC integration, external I/O connectors and EFC
Note: The CRT is able to support Simple or Redundant Power Supply (Factory Option)
© Safran Data Systems
COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
of
the
various
signals
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
to
the
user
system
Safran Data Systems
.
Ref.
DTU 100042
Is.Rev.
5.17
Date:
Dec.
03, 2021Sept. 30, 2021
is
normally
performed
Page 6
Advertisement
Table of Contents
