Safran CORTEX CRT Quantum User Manual page 20

Markings are placed at the rear of the unit, regarding the power ratings and "CE" compliance:
The "CE" symbol on the PC chassis indicates that it is in compliance with the Electromagnetic Compatibility
directive and the low Voltage directive.
This equipment is a: Group 1 Class A product
The following technical standards must be met:
EN 55022
EN 61000-3-2
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-4-11
The unit also complies with all staff safety standards and decrees, in particular:

Decree of 14.11.1989 and additions: Regulation of worker protection,

Directive 2006/95/EC.
In accordance with European Community directives, a "Declaration of Conformity" has been made and is
available by contacting technical support.
Recommendation concerning the cabling:
"CE" certification has been carried out with 3-meter interconnecting cables with remote equipment.
SAFRAN DATA SYSTEMS recommends the use of high quality interconnecting cables type. The high quality
recommended user interconnecting cables are "shield twisted pair" or "coaxial cable" industrial type with cable
shield. The cable shield will provide the necessary mechanical protection.
Not using this high quality designed cable could result in unexpected intersystem/extrasystem electromagnetic
emission and susceptibility.
© Safran Data Systems
COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
CE MARKING
Limits and methods of measurement of radio interference characteristics of information
technology equipment
Limits for harmonic currents emissions''
Limits and methods of measurement - Section 2: electrostatic discharge immunity test
Limits and methods of measurement – Section 3: Radiated radio-frequency,
electromagnetic field immunity test
Limits and methods of measurement - Section 4: Electrical fast transient / burst immunity
test
Limits and methods of measurement - Section 5: Surge immunity test
Limits and methods of measurement - Section 6: immunity to conducted disturbances,
induced by radio-frequency fields
Limits and methods of measurement - Section 8: Power frequency magnetic field immunity
test
Limits and methods of measurement - Section 11: Voltage dips, short interruptions as
voltage variations immunity tests
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Safran Data Systems
.
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec. 03, 2021Sept.
30, 2021
Page xx