Change Time-Tag Format; Telemetry Simulation; Access To Simulated Tm Files; Swap G1 And G2 After Viterbi Encoding - Safran CORTEX CRT Quantum User Manual

4.2.7.7.4. Change Time-tag Format

The default value of the time-tag format can be change with a TCP-IP Special Command (See STI 100013 -
§2.3.2.3.2). This value can be set in registry settings. The value will be taken into account at the next Cortex
software start-up.
Registry path:
Keyword:
Default setting at delivery:
Enter value between 0 (Code 0) and 5 (Code 5).

4.2.7.8. Telemetry Simulation

4.2.7.8.1. Access to Simulated TM Files

To modify the name and access path of the simulated telemetry files (TMS1 or TMS2 in File mode):
Registry path:
Keyword:
Default setting at delivery:
Extension _01.txt to _08.txt will be automatically appended to the selected name.

4.2.7.8.2. Swap G1 and G2 after Viterbi Encoding

To swap G1 and G2 after Viterbi encoder.
Registry path:
Keyword:
Default setting at delivery:
Set the keyword to 1 to swap G1 and G2.
© Safran Data Systems
COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
HKEY_LOCAL_MACHINE\SOFTWARE\In-snec\Cortex Station\Current Version
UseNTP
0
HKEY_LOCAL_MACHINE\SOFTWARE\In-snec\CortexCRT\SetDefault\Preferences\TMSx
(x = TMS number)
FileDir
D:\ZDS\Data \CRT\Tms1\Ftms
D:\ZDS\Data \CRT\Tms2\Ftms
HKEY_LOCAL_MACHINE\SOFTWARE\In-snec\CortexCRT\SetDefault\Preferences\TMSx
(x = TMS number)
SwapG1G2
0 (G1 before G2)
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Safran Data Systems
.
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec.
03, 2021Sept. 30, 2021
Page 250