Pc Clock Synchronization To Irig Time - Safran CORTEX CRT Quantum User Manual

To change the file name and access path of the status to log for the 1st additional flow:
Registry path:
Keyword:
Default setting at delivery:

4.2.7.7.3. PC Clock Synchronization to IRIG Time

Allows the PC time to be synchronized to IRIG-B time.
Note: the unit must be set as Time zone GMT, no daylight saving time.
To enable/disable the plug-in IRIG B / Auto leap year feature:
Registry path:
Keyword:
Default setting at delivery:
Enter 0 (inactive) or 1 (active).
To enable/disable the IRIG update of the PC clock:
Registry path:
Keyword:
Default setting at delivery:
Enter 0 (inactive) or 1 (active).
To enable/disable the automatic leap year update:
Registry path:
Keyword:
Default setting at delivery:
Enter 0 (inactive) or 1 (active).
When AutoLeapYear is activated, the leap year setup does not need to be managed through Global CORTEX
CRT Table. It is automatically managed by the SPS by checking the current year in the Windows Clock.
To enable/disable NTP time update at the start:
Registry path:
Keyword:
Default setting at delivery:
Enter 0 (inactive) or 1 (active).
© Safran Data Systems
COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
HKEY_LOCAL_MACHINE\SOFTWARE\IN-SNEC\Cortex Station\SetDefault\Log\10
FileConfig
D:\ZDS\Data\SPS\Logging\Menu1\LogFlow10.txt
HKEY_LOCAL_MACHINE\SOFTWARE\In-Snec\CortexCRT\SetDefault\Preferences\Irig
Enable
0 (inactive)
HKEY_LOCAL_MACHINE\SOFTWARE\In-Snec\CortexCRT\SetDefault\Preferences\Irig
IrigUpdate
0 (inactive)
HKEY_LOCAL_MACHINE\SOFTWARE\In-Snec\CortexCRT\SetDefault\Preferences\Irig
AutoLeapYear
0 (inactive)
HKEY_LOCAL_MACHINE\SOFTWARE\In-Snec\CortexCRT\SetDefault\Preferences\Irig
UseNTP
Not set (default value = 1)
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Safran Data Systems
.
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec.
03, 2021Sept. 30, 2021
Page 249