Ground Correction; Board Correction - Safran CORTEX CRT Quantum User Manual

3.6.3.4.2. "Ground Correction"

Parameter Ground Correction (∆��������������_��������
calibration » requests. It allows to compensate for phase delays due to the presence of equipment that are used
during station calibration but are normally not inserted in the range measurement loop (typically, the RF Test
Loop Translator and associated couplers and connection cables, mounted in the antenna hub for converting and
routing the uplink signal to the downlink path).

3.6.3.4.3. "Board Correction"

Parameter Board Correction (∆������������_��������) is programmable tone by tone and only applies to « range
measurement » requests. It allows to compensate for spacecraft contribution to the range measurement.
© Safran Data Systems
COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
)
is programmable tone by tone and only applies to «
Safran Data Systems
.
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec.
03, 2021Sept. 30, 2021
Page 158