Configuration S100685: Agencies / Ait 2U Without Efc; Figure 17: Configuration S100685 Rear Panel Connectors; Table 11: Configuration S100685 R - Safran CORTEX CRT Quantum User Manual

2.3.3.2.2. Configuration S100685: Agencies / AIT 2U without EFC

The connection of the various signals to the user system is directly performed ont the chassis rear panel as
described in 2.3.1.1. The computer connections (LAN, VGA) are directly available on the Industrial Computer
rear panel. The picture below lists and identifies the various connections to the computer ports, and the I/O
connectors of the Cortex CRT Quantum dedicated hardware.
Connecto
r
1 Upper power supply unlock
2 Upper power supply AC input
3 Lower power supply unlock
4 Lower power supply AC input
5 Power supply Sound Alarm Button
6
7
8
9
10
Downlink – IF Nominal 1
11
Downlink – IF Nominal 2
12
Downlink – IF Nominal 3
13
14 Reference Frequency 1
15
© Safran Data Systems
COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL

Figure 17: Configuration S100685 Rear panel Connectors

Usage
system
system
Mechanical Ground
NIC1 – LAN
NIC2 – LAN
VGA
USB 3.0
Uplink – IF Nominal 1
Table 11: Configuration S100685 Rear panel Connectors
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Connect
or
16
Uplink – IF Alternate 1
17
Uplink – IF Alternate 2
18
Downlink – IF Alternate 1
19
Downlink – IF Alternate 2
20
Downlink – IF Alternate 3
21
22 Reference Frequency 2
23
24
25
26
27
28
29 Test Points, 1-PPS Out, Sync Pulse
30 IRIG In, 1-PPS In, Video In, Auxiliary
Safran Data Systems
.
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec.
03, 2021Sept. 30, 2021
Usage
Uplink – IF Nominal 2
AGC out 1
AGC out 2
AGC out 3
Video out 1
Video out 2
Reserved
In
In
Page 9