Safran CORTEX CRT Quantum User Manual page 310

REMOTE USERS
Set CTX Document ID status to 0
Set Update CTX Document status to 0
Store CTX Document #N with Label
Accept
Set CTX Document ID status to N.
Set Update CTX Document status to 0.
Update label to CTX Document #N
in CTX Document Name Table
Configuration Request
Accept
Set Update CTX Document status to 1
Load CTX Document #N
Accept
Set CTX Document ID status to N.
Set Update CTX Document status to 0
Apply all configuration parameters
© Safran Data Systems
COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
CORTEX SPS
Start Applicati Start Application Start Application
Load CTX Document in RAM
Loaded
Load CTX Document Name Table
Loaded
Save Active CTX Table to CTX Document # N
Saved
Save CTX Document Name Table
Saved
Every 10 seconds : save Active CTX Table to the disk
Saved
Load CTX Document #N to Active CTX Table (*)
Loaded
Figure 97: CTX Document Management
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Last Active CTX Document CTX Document Name Table
(Disk)
(*) If file error: set all parameters
to their default value
Safran Data Systems
.
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec.
03, 2021Sept. 30, 2021
CTX Document # N
(Disk) (disk)
Page 230