Table of Contents
Advertisement
SPS System Parameters Modification
4.2.7.
SPS System parameters can be adjusted in the Windows registry. System parameters are high-level parameters
that cannot be changed without stopping the CORTEX SPS application software:
The following is a list of the value entries and sub keys referenced for CORTEX CRT Quantum product.
This is not intended to be a complete list of all value entries and sub keys for SAFRAN DATA SYSTEMS
applications in the Windows Registry. Please note that the entries in the Registry depend on the applications and
services installed on the CORTEX.
THE KEYS IN "SIGNAL PROCESSING" PATH CANNOT BE MODIFIED.
4.2.7.1. General Procedure for Changing a Registry Key
1. Click on Start / Run
2. Start the Windows registry editor (regedit)
3. Select referenced sub key path. Path root is [HKEY_LOCAL_MACHINE\SOFTWARE\In-snec\CortexCRT]
4. Double click on desired parameter, and change the value
5. Close the editor window
6. Stop and restart the CORTEX software
In multi-configuration mode, there is one set of parameters by menu selection. The menu ID is added to sub key
path.
For
example,
[HKEY_LOCAL_MACHINE\SOFTWARE\In-snec\CortexCRT\SetDefault]
for single configuration mode and for the menu one in the case of multi-configuration, and the path is
[HKEY_LOCAL_MACHINE\SOFTWARE\In-snec\CortexCRT\SetDefault2]
for the menu 2.
© Safran Data Systems
COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
WARNING:
the
path
for
'Non
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Coherent
/
Coherent
Safran Data Systems
.
Ref.
DTU 100042
Is.Rev.
5.17
Date:
Dec.
03, 2021Sept. 30, 2021
AGC'
parameters
is
Page 237
Advertisement
Table of Contents
