Safran CORTEX CRT Quantum User Manual page 44

1.6. Cortex CRT QUANTUM Performances
On the CORTEX CRT Quantum most functions are performed digitally, mainly by powerful FPGAs. The following
functions and signal processing performances are listed (this list corresponds to a fully equipped CORTEX CRT
Quantum unit):

IF reception

Telemetry processing

IF modulation

Satellite ranging
With the optional Embedded Frequency Converter, the CRT additional functions are:

RF reception in L/S band
PERFORMANCES LISTED IN THIS SECTION ARE TYPICAL VALUES MEASURED IN BEST CASE CONDITIONS. SOME
PLEASE, CONTACT SAFRAN DATA SYSTEMS FOR MORE INFORMATION.
PROGRAMMING RESOLUTION: REFER TO ANNEX 1. CONFIGURATION PARAMETERS ARE SPECIFIED OVER 32-BIT
INTEGERS OR SINGLE-PRECISION FLOAT (8-BIT EXPONENT AND TWOS-COMPLEMENT 24-BIT MANTISSA).
HOWEVER, THE RESOLUTION CAN BE LIMITED BY THE HARDWARE DESIGN.
© Safran Data Systems
COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
FUNCTIONALITY MAY STILL BE IN DEVELOPMENT PHASE.
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.

Satellite telecommanding

Telemetry simulation

Time code decoding and data time-tagging

Reference frequency

RF modulation in L/S band
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec. 03, 2021Sept.
30, 2021
Page 19