Safran CORTEX CRT Quantum User Manual page 40

1.4.3.7. CORTEX Configuration at Delivery
The CORTEX CRT Quantum is supplied with the hardware components and software licenses (number of
telemetry chains, TM bit rate, decoding capability, commanding and ranging capability, etc...) covering the
Customer requirements. The configuration of the CORTEX at delivery (hardware components & licenses) is
saved to a Flash Memory chip on the MSP module.
S
WAPPING OF THE
PERFORMING THAN
A detailed description of the CORTEX configuration at delivery is provided in Annex 5 of the User Manual and in
the Factory Acceptance Test report (document reference: CRE100047).
1.4.3.8. Software Version
Software version at delivery is described in Annex 5 of the User Manual, in the Factory Acceptance Test Report.
© Safran Data Systems
COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
MSP CORTEX A
MODULE FROM
CORTEX A (
SUPPORTS LICENSES WHICH ARE NOT IMPLEMENTED IN
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
WARNING:
CORTEX B
TO IS NOT ALLOWED IF
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec. 03, 2021Sept.
30, 2021
CORTEX B
IS MORE
CORTEX A).
Page 15