Intel Agilex F Series User Manual page 20

PMA Setting
Allows you to make changes to the PMA parameters that affect the active transceiver
interface. The following settings are available for analysis:
• Serial Loopback: Displays the signal status between the transmitter and the
receiver.
• VOD: Specifies the voltage output differential of the transmitter buffer.
• Pre-emphasis tap:
— Pre-tap 1: Specifies the amount of pre-emphasis on the first pre-tap of the
transmitter buffer.
— Pre-tap 2: Specifies the amount of pre-emphasis on the second pre-tap of the
transmitter buffer.
— Post-tap 1: Specifies the amount of pre-emphasis on the post-tap of the
transmitter buffer.
Figure 12. QSFP NRZ-PMA Setting
Data Type
The Data Type control specifies the type of data pattern contained in the transactions.
Select the following available data types for analysis:
• PRBS7: pseudo-random 7-bit binary sequences
• PRBS15: pseudo-random 15-bit binary sequences
• PRBS23: pseudo-random 23-bit binary sequences
• PRBS31: pseudo-random 31-bit binary sequences (default)
® ™
Intel Agilex F-Series FPGA (Two F-Tiles) Development Kit User Guide
20
4. Board Test System
739942 | 2022.09.21
Send Feedback