Skoda Octavia II 2004 Workshop Manual page 84

Octavia II 2004 ➤ , Octavia II 2010 ➤ , Superb II 2008 ➤ , Superb II 20 ...
Propshaft and rear final drive - Edition 10.2018
Insert top rear rubber-metal bearing -A- and bottom rear rubber-
metal bearing -B-
Installation position of the stop washer -B-
– Insert the pegs -A- in the holes of the stop washer -arrows-.
The stop washer -B- is then connected captively with the rubber-
metal bearing.
• Final drive in fitting position
Installation position of top rear rubber-metal bearing:
• The top rear rubber-metal bearing point the pegs -A- upwards
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
80
Rep. gr.39 - Final drive - rear differential