Skoda Octavia II 2004 Workshop Manual page 48

Octavia II 2004 ➤ , Octavia II 2010 ➤ , Superb II 2008 ➤ , Superb II 20 ...
Propshaft and rear final drive - Edition 10.2018
Tighten warm-type clamp
-A- Hose binding claw
In case of repair assign the warm-type clamp via ⇒ Electronic
catalogue of original parts .
Remove the flange
Install the flange
Remove the intermediate bearing
– The rubber guide of the intermediate bearing must be cut
through and the sheet covering must be removed.
-A- Separating tool e. g. -VAS 251 409- or -Kukko 17-1-
-B- Extractor e. g. -VAS 251 415- or -Kukko 18-0-
44
Rep. gr.39 - Final drive - rear differential
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.