Skoda Octavia II 2004 Workshop Manual page 102

Octavia II 2004 ➤ , Octavia II 2010 ➤ , Superb II 2008 ➤ , Superb II 20 ...
Propshaft and rear final drive - Edition 10.2018
6.1.4 Summary of components - generation IV four-wheel drive clutch, Octavia
II, Superb II, Yeti, up to 10/2013
1 - O-ring
❑ Replace after disas‐
sembly
❑ coat with oil for four-
wheel drive clutch be‐
fore inserting
2 - Housing for four-wheel
drive clutch
❑ Removing and installing
the four-wheel drive
clutch
⇒ "6.8.2 Removing and
installing generation IV
four-wheel drive clutch,
final drive 0BR, Octavia
II, Superb II, Yeti, up to
10/2013", page 120
3 - Four-wheel drive control
unit - J492-
❑ with control valve of
opening degree of cou‐
pling - N373-
❑ Removing and installing
⇒ "6.10.2 Removing and
installing generation IV
four-wheel drive clutch
control unit, final drive
0BR, Octavia II, Superb
II, Yeti, up to 10/2013",
page 137
4 - Screw
❑ 6 Nm
5 - Gasket ring for propshaft
flange
❑ Removing and installing
⇒ "4.3 Replacing gasket
ring for output flange of the rear final drive", page 85
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
6 - Propshaft flange
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
❑ Removing and installing
7 - Nut
❑ Replace after disassembly
❑ before installing, coat with locking agent - D 000 600-
❑ 210 Nm
8 - Screw
❑ 4 pieces
❑ 50 Nm
9 - Cover
❑ for oil filter housing
❑ Oil filter change is not necessary
10 - Cover
❑ for vacuum unit
98
Rep. gr.39 - Final drive - rear differential
⇒ "4.3 Replacing gasket ring for output flange of the rear final drive", page 85