Skoda Octavia II 2004 Workshop Manual page 19

1 - Four-wheel drive control
unit - J492-
❑ Removing and installing
⇒ "6.10.3 Removing and
installing V generation
four-wheel drive clutch
control unit, Yeti, from
11/2013", page 139
2 - Pump for four-wheel drive
clutch - V181-
❑ Check ⇒ Vehicle diag‐
nostic tester.
❑ Removing and installing
⇒ "6.7.3 Removing and
installing V generation
four-wheel drive clutch
pump, rear final drive
0BR, Yeti from
11/2013", page 114
3 - Diagnostic connection
❑ Installation position:
front left footwell
4 - Accelerator pedal module
❑ with accelerator pedal
position sender - G79-
and accelerator pedal
position sender 2 -
G185-
❑ Removing and Installing
⇒ Engine; Rep. gr. 20
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
Octavia II 2004 ➤ , Octavia II 2010 ➤ , Superb II 2008 ➤ , Superb II 20 ...
Propshaft and rear final drive - Edition 10.2018
15
5. Electrical components