Skoda Octavia II 2004 Workshop Manual page 28

Octavia II 2004 ➤ , Octavia II 2010 ➤ , Superb II 2008 ➤ , Superb II 20 ...
Propshaft and rear final drive - Edition 10.2018
– Unscrew screws -2- and -3- for pendulum support.
– Unscrew screws -arrows- of the connections of the propshaft/
rear final drive.
• The assistance of a second mechanic is required for the next
steps.
• When pull the propshaft off the centering stud, make sure that
the gasket ring -arrow- in the centring sleeve is not damaged.
• If the sealing ring is damaged, the propshaft must be replaced.
– Push engine/gearbox assembly forwards with the assistance
of a second mechanic, while pushing the propshaft horizon‐
tally to the front of the vehicle and pulling it off the centering
stud of the rear final drive.
– Secure the propshaft -A- to the body e.g. with wire -B-.
Installing
24
Rep. gr.39 - Final drive - rear differential
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.