Skoda Octavia II 2004 Workshop Manual page 36

Octavia II 2004 ➤ , Octavia II 2010 ➤ , Superb II 2008 ➤ , Superb II 20 ...
Propshaft and rear final drive - Edition 10.2018
– Unscrew intermediate bearing of propshaft from the vehicle
-arrows-.
– Mark the position of the propshaft with flexible disk to the out‐
put flange of the angle gearbox.
– Unscrew propshaft from angle gearbox -arrows-.
When loosening and tightening, counterhold the propshaft on the
rear final drive.
– Remove pendulum support from gearbox. to do so release the
bolts -arrow B- and -arrow C-.
32
Rep. gr.39 - Final drive - rear differential
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.