Modifiable Module Parameters - Festo MSE6-E2M Operating Instruction

Parameterisation
9.4

Modifiable module parameters

Module parameter: Monitor
Function number 4828 + m * 64 + 0
Description The monitoring of single errors can be independently activated, deactivated or
suppressed for the energy efficiency module.
Activation of the monitoring function causes the following:
– The error is sent to the bus node.
– The error is displayed via the module error LED.
Bit Meaning
0 Monitoring SCS, short circuit/overload sensor supply
1 Monitoring SCO, short circuit/overload outputs
2 Undervoltage monitoring U
6 Monitoring of limit values
7 Monitoring of parameters
Values 0 = not active
1 = active, default
Comment Monitoring of parameters:
Some parameters are checked for non-permitted values during parameterisa-
tion, e.g.
– Limit value monitoring startup
– Units of measure
– Limit values
Tab. 45: Monitor module parameter
Festo — MSE6-E2M — 2022-08d
m = module number 1
Out/A
61