Description Of The Input Data And Output Data - Festo MSE6-E2M Operating Instruction

Functions
Data field / function
Flow measurement
Measured value
Consumption measurement
Measured value
Function status
Control/operation
Pressure measurement
Measured value
Pressure change measurement
Measured value
Blocking function
Function status
Input data
Selectable input data
Input address
Input data
1) m = module number 1
Tab. 3: Overview of input data and output data
5.2.2

Description of the input data and output data

– The input words and output words of all input data and output data are shown in the Motorola
format, MSB-LSB. If the control system uses a different byte order, this must be taken into account
in the user program.
– The input words, 2 bytes, 16 bits, are sent to the higher-order controller.
– The output words, 2 bytes, 16 bits, are sent from the higher-order controller.
5.2.2.1 Output word Am.0 module control
The consumption measurement and the blocking function are controlled in the Am.0 output word.
Data format of output word 16 bits, right-justified
D15 D14 D13 D12 D11 D10 D9
B15 B14 B13 B12 –
MSB
Abbreviations used
B0 Shut-off valve controller
B1 Auto blocking
22
1)
Input word
Em.0
Em.1
Em.3
–
Em.2
with selectable input data è 5.2.3 Selectable input data function.
Em.3
–
Em.4
Em.5
D8 D7
– – – B7
Output word
–
–
–
Am.0
–
–
Am.0
Am.1 è 5.2.3 Selectable input
data function.
–
D6 D5 D4 D3
B6 B5 B4 B3
Festo — MSE6-E2M — 2022-08d
1)
D2 D1 D0
B2 B1 B0
LSB