Module Common Error Led - Festo MSE6-E2M Operating Instruction

Malfunctions
The energy efficiency module offers extensive diagnostics options and error handling via the fieldbus
or diagnostics interface.
Diagnostics
1 On-site with LED indi-
cators
2 On site via the
bus node diagnostics
interface and opera-
tion with the help of
CPX-FMT, Festo Main-
tenance Tool or Festo
Automation Suite
3 System status scan-
ning via the network,
status bits scanning
System diagnostics
with the network, via
the
I/O diagnostics interface
Network-specific
diagnostic functions
Tab. 59: Diagnostics options
10.1.1

Module common error LED

Errors of the module are indicated via the module common error LED on the electrical linkage and can,
if necessary, be evaluated with the operator unit or a PC with diagnostic software.
Certain errors are only indicated when the appropriate monitoring has been activated.
Corresponding information can be found in the description of the bus node
è 1 Applicable documents.
Festo — MSE6-E2M — 2022-08d
Description
Diagnostics with common error LED on the
module or LEDs on the bus node.
– Shows current error messages in plain text
– Offers access to the diagnostic memory
8 status bits display common diagnostic mes-
sages, global error message.
Internal diagnostics data can be read via the
I/O diagnostics interface. In this way, detailed
diagnostic information can be accessed, even
if the network used does not offer any exten-
sive network-specific diagnostic functions.
The I/O diagnostics interface offers:
– Access to the current error message
– Access to the diagnostic memory
– Read access to internal parameters and
data
Diagnostic functions or communication serv-
ices e.g. DPV1, PROFIBUS
Information
è 4.3 Display compo-
nents.
è 1 Applicable docu-
ments.
CPX system descrip-
tion è 3 Additional
information.
73