Technical Data, Electrical - Festo MSE6-E2M Operating Instruction

Technical data
MSE6-E2M
Accuracy of flow rate
Repetition accuracy, zero
point
Repetition accuracy, margin
Temperature coefficient,
margin
Pressure-dependent margin
Shut-off valve
Switch-on pressure
Switch-off pressure
Residual pressure
1) % FS = percentage of the measurement value range end value, full scale
2) Typical accuracy under nominal conditions 0.6 MPa (6 bar, 87.02 psi), 23 °C and horizontal mounting position
Tab. 68: Technical data, pneumatic
12.3

Technical data, electrical

MSE6-E2M
Operating voltage supply for electronics and sensors, U
Nominal voltage
Current consumption
Cable length
Load voltage supply for actuator technology, U
Nominal voltage
Current consumption
Festo — MSE6-E2M — 2022-08d
± 3% of the measured value, + 0.3% FS
[%FS] ± 0.2
[%FS] ± 0.8
[%FS/K] Typically ± 0.1
[%FS/ ± 5
MPa]
[%FS/bar] ± 0.5
[%FS/psi] ± 0.0345
£ 0.4
[MPa]
£ 4
[bar]
£ 58.02
[psi]
£ 0.1
[MPa]
£ 1
[bar]
£ 14.5
[psi]
£ 0.1
[MPa]
£ 1
[bar]
£ 14.5
[psi]
[V DC] 24 ± 25 %
[mA] Max. 300 at 24 V
[m] Max. 30
Out/A
[V DC] 24 – 25 %/+ 10 %
[mA] Max. 100
El/Sen
81