Festo MSE6-E2M Operating Instruction page 63

Parameterisation
Units module parameter [Units]
The parameter determines the unit for flow rate, consumption, module output pressure P2 and flow
rate standard and applies to all relevant input and output values and also parameter values.
The data width is 8 bits, 1 byte. The pressure, flow rate, consumption and flow rate standard each
occupy 2 bits in the units module parameter.
Module parameter: unit pressure
Function number 4828 + m * 64 + 8
Description Specifies the unit for all pressure-related data.
Bit Bit 0, 1: Unit pressure
All other bits are reserved.
Bit 1 0 Value
0 0 0
0 1 1
1 0 2
1 1 3
Comment If parameter monitoring is active, Pm.0.7, invalid values will result in parameter-
isation error FN29 è 10.2 Error numbers.
Tab. 47: Unit pressure module parameter
Module parameter: unit flow rate
Function number 4828 + m * 64 + 8
Description Specifies the unit for all flow-related data.
Bit Bit 2, 3: unit flow rate
All other bits are reserved.
Bit 3 2 Value
0 0 0
0 1 1
1 0 2
1 1 3
Comment If parameter monitoring is active, Pm.0.7, invalid values will result in parameter-
isation error FN29 è 10.2 Error numbers.
Tab. 48: Unit flow rate module parameter
Festo — MSE6-E2M — 2022-08d
m = module number 1
Meaning
mbar, default
kPa
psi/10
Not permissible
m = module number 1
Meaning
l/min, default
Not permissible
scfm/10
Not permissible
63