Commissioning With Bus Node Cpx-M-Fb34; Interfaces And Display Components - Festo MSE6-C2M Manual
Energy efficiency module
Hide thumbs
Also See for MSE6-C2M:
- Instructions & operating (6 pages) ,
- Operating instruction (104 pages)
Table of Contents
Advertisement
Commissioning
The product is delivered with pre-set DIL switch and parameters.
Information about DIL è switches www.festo.com/sp .
6.3
Commissioning with bus node CPX-M-FB34
This section provides a brief overview of the interfaces of the bus node.
Detailed information on the bus è nodes www.festo.com/sp .
6.3.1
Interfaces and display components
Interfaces and display components on the bus node CPX-M-FB34
1 Service interface
2 Network-specific and CPX-specific LED dis-
plays
Fig. 5 Interfaces and display components on the bus node CPX-M-FB34
16
3 Memory card (under a cover)
4 DIL switch (under a cover)
5 Network connection (RJ45 bushing)
Festo — MSE6-C2M — 2019-03
Advertisement
Table of Contents
