Connecting To The Network - Festo MSE6-E2M Operating Instruction

Commissioning
5. Fit the cover.
6. Tighten the retaining screws of the cover. Tightening torque: 0.4 Nm ± 10%.
8.6.3

Connecting to the network

The bus node is connected to the network by a specific connection technology.
Bus node
CPX(-M)-FB43
CPX(-M)-FB44
Tab. 36: Connection technology and network connectors
The NECU-M-S-D12G4-C2-ET plug is designed for Ethernet cables with a diameter of 6 ... 8 mm.
The FBS-RJ45-PP-GS plug is designed for Ethernet cables with a diameter of 5 ... 8 mm.
Network connections on the bus node CPX(-M)-FB43
The network ports are labelled TP1 and TP2.
Connection TP1, TP2
Tab. 37: Pin allocation of network interface TP1 and TP2, PROFINET
Network connections on the bus node CPX(-M)-FB44
The bus node has 2 RJ45 push-pull sockets for connection to the network, AIDA-compliant
RJ45 bushing
52
Connection technology
2 sockets, M12, D-coded, 4-pin,
according to IEC 61076-2
2x RJ45 bushing, push-pull,
AIDA-compliant, corresponding to
IEC 60603, IEC 61076-3
Pin Signal
1 TD+
2 RD+
3 TD–
4 RD–
Housing Shield/FE
Pin Signal
1 TD+
2 TD-
3 RD+
4 n.c.
5 n.c.
6 RD-
7 n.c.
Network connectors
NECU-M-S-D12G4-C2-ET plug
FBS-RJ45-PP-GS plug
Explanation
Transmit Data, TD+
Receive Data, RD +
Transmitted data –
Received data –
Shield/functional earth
Explanation
Transmit Data, TD+
Transmitted data –
Receive Data, RD +
Not connected
Not connected
Received data –
Not connected
Festo — MSE6-E2M — 2022-08d