Technical Appendix; Technical Data Bus Node Type Cpx-Fb6 - Festo CPX-FB6 Manual

A. Technical appendix
A.1

Technical data bus node type CPX-FB6

General
General technical data
Protection class according to EN 60 529, CPX-
FB6 completely mounted, plug connector, like
accessories, plugged in or equipped with pro-
tective cap
Protection against electric shock
(protection against direct and indirect contact in
accordance with IEC/DIN 60204-1)
Current consumption bus node CPX-FB6
Internal current consumption at 24 V (internal
electronics):
– from operating voltage supply for electronics/
sensors (U )
EL/SEN
Galvanic isolation
– Incoming interface
– Continued interface
Module code (CPX-specific)
Module identifier (e.g. on the handheld)
Fieldbus
Version
Type of transmission
Protocol
Baud rate
Festo P.BE-CPX-FB6-EN en 1207c
See CPX system description:
– Description P.BE-CPX-SYS-...
IP 65/IP 67
By means of PELV power supply unit
(Protected Extra Low Voltage)
typ. 50 mA
galvanically separated (optocoupler)
non-floating with CPX peripherals
Remote I/O: 203
Remote controller: 154
Remote I/O: FB06-RIO
Remote controller: FB06-RC
RS 422, floating
Serial asynchronous, full-duplex
Interbus
500 kBaud, 2 MBaud
A-3