Registering Tools In Control Software - Planmeca PlanMill 50 S User Manual

8 Operating milling unit

8.11 Registering tools in control software

54 Planmeca PlanMill 50 S
4. Loosen the clamping screws of the clamping ring (do not remove).
5. Remove the clamping ring by turning this in a clockwise direction to the
right
6. Remove the workpiece.
7. Insert the clamping ring and turn this anticlockwise to the left, until
reaching the stop
8. Tighten the clamping screws of the clamping ring until hand-tight.
1. Start Remote DENTAL by double-clicking the PlanMill 50 S icon on the
desktop.
2. Click the green Confirm button to start the automatic reference run.
User's manual