7 Adapters
7.2 Adapters for premilled abutments
7.2.1 DESS adapter
34
Planmeca PlanMill 50 S
4. Tighten the three middle screws using an Allen key.
Before milling adapter calibration pieces, ensure that the milling unit is
calibrated properly. See section "Calibrating milling system" on page 88 for
more information.
Pins for calibrating adapters can be ordered from your local premilled blank
supplier.
The calibrating file for milling test pins is available from your local dealer and
after installing can be found from folder
S \Adapter Calibration .
C:\NC_Daten\Planmeca Plan Mill 50
User's manual