Status Indicators - Planmeca PlanMill 50 S User Manual

Item Designation
1 Information field
2 Time display
3 Override indicator
4 Spindle speed display
5 Tool information

9.8 Status indicators

1. Lid open/closed
This icon indicates whether the lid is closed (the
icon is green) or open (the icon is red).
To activate/deactivate the lid status monitoring,
right-click on the on/off selection. When
deactivated the icon shows in grey.
3. Temperature sensor
Displays the actual temperature inside the unit.
User's manual
Description
Shows current information.
Displays the time of the ongoing milling process that has
currently elapsed.
Shows the current override value set with ongoing
processing.
Displays the current spindle rotational speed with ongoing
processing.
This field displays information on the currently clamped
tool.
2. Cooling liquid
If the symbol lights up green then sufficient
cooling liquid is in the coolant tank. If the
quantity is too low then the symbol lights up red.
To activate/deactivate the coolant liquid
monitoring, right-click on the on/off selection.
When deactivated, the icon shows in grey (as in
dry processing).
4. Displays information about the current used
tool in the spindle: tool position, tool type, tool
service life and faults that arise.
9 Control software
Planmeca PlanMill 50 S 75