Appendix A: Suction Unit (Optional); Safety Instructions; Symbols Used; Electrical Safety - Planmeca PlanMill 50 S User Manual

Appendix A: Suction unit (optional)

Appendix A: Suction unit (optional)
A.1 Safety instructions
A.1.1 Symbols used
A.1.2 Electrical safety
A.1.3 Dangers to eyes, breathing and skin
A.1.4 Warning and information labels
116 Planmeca PlanMill 50 S
WARNING
Refers to a possibly dangerous situation. If it is not avoided, it could result in
death or severe injury. Please consult the manual where this symbol is
displayed.
CAUTION
Refers to a possibly harmful situation. If it is not avoided, damage could be
caused to the product or to something in its environment.
NOTE
Refers to handling tips and other particularly useful information. This does
not signify a dangerous or harmful situation.
This extraction unit is designed to meet the safety requirements of the Low
Voltage Directive 2006/95/EC(previously numbered 73/23/EEC).
WARNING
During works with the pump/motor housing open, live, 230/115 volt
components are accessible. Make sure that rules and regulations for work
on live components are always observed.
NOTE
To reduce the risk of fire, electric shock or injury always isolate the system
from the mains power supply before removing the pump/motor panel.
Use only as described in the manual.
Connect to a properly grounded outlet.
Once used, the filters in the extraction unit may contain a mixture of
particulates, some of which may be sub micron size. When the used filters
are moved it may agitate some of this particulate, which could get into the
breathing zone and eyes of the operative.
Additionally, depending on the materials being used, the particulate may be
an irritant to the skin.
CAUTION
When changing used filters always wear mask, safety glasses and gloves.
The following figures show the labels and symbols and list their location on
the unit.
User's manual