Planmeca PlanMill 50 S User Manual page 28

5 System description
22 Planmeca PlanMill 50 S
In order to process work-pieces, the milling unit must be equipped with at
least one tool. The appropriate and ready-ringed tools for the direct change
holder are available from Planmeca Sales.
Tool Diameter/geometry
numbe
r
2 2.0 mm / Radius
3 1.5 mm / Radius
4 1.0 mm / Radius
7 2.0 mm / Radius
8 1.5 mm / Radius
9 1.0 mm / Radius
11 2.5 mm / Radius
12 1.0 mm / Radius
13 2.5 mm / Radius
14 1.0 mm / Radius
15 0.6 mm / Radius,
conical shaft
17 1.5 mm / toric long shaft Zr/Al/
21 2.5 mm / Radius
22 1.0 mm / Radius
23 0.6 mm / Radius,
conical shaft
Material(s) to Name on the user
be used with interface
Ti 2.0 mm Ti Radius
Ti 1.5 mm Ti Radius
Ti 1.0 mm Ti Radius
CoCr 2.0 mm CoCr Radius
CoCr 1.5 mm CoCr Radius
CoCr 1.0 mm CoCr Radius
PMMA/Wax 2.5 mm PMMA-Wax
Radius
PMMA/Wax 1.0 mm PMMA-Wax
Radius
Zr/Al 2.5 mm Zr-Al Radius
Zr/Al 1.0 mm Zr-Al Radius
Zr/Al/ 0.6 mm Zr-Al-PMMA-
PMMA/Wax Wax Radius
1.5 mm Zr-Al-PMMA-
PMMA/Wax Wax SHAFT
Glass ceramic 2.5 mm ceramic Radius
Glass ceramic 1.0 mm ceramic Radius
Glass ceramic 0.6 mm ceramic Radius
User's manual