Planmeca PlanMill 50 S User Manual page 75

Symbol
User's manual
Designation
Navigation arrow (ten
steps down)
Remove
Service time symbol
Attention symbol
Warning symbol
Tool life elapsed
Description
For navigating down through the tool list, ten steps at
a time.
For removing the marked tool.
The five green squares next to the symbol show the
service time of the tool and change from green to
yellow and then red after a predefined time.
Signals that the tool must be measured.
Signals that the tool is broken or lies outside the
defined tool length, after measuring.
Signals that the tool life has elapsed and it must be
replaced.
9 Control software
Planmeca PlanMill 50 S 69