Registering Tool In Software - Planmeca PlanMill 50 S User Manual

Symbol

9.6 Registering tool in software

Symbol
User's manual
Designation
Tool broken
1. Click the tool registration button.
2.
In the following window, click on the tool you would like to register.
Designation
Navigation arrow (ten
steps up)
Navigation arrow (one
step up)
Navigation arrow (one
step down)
Description
Indicates a tool length error. In this case check
whether the tool is broken.
Description
When a tool is selected on the list its properties are
shown in this field.
For navigating upwards through the tool list, ten steps
at a time.
For navigating upwards through the tool list in single
steps.
For navigating down through the tool list in single
steps.
9 Control software
Planmeca PlanMill 50 S 73