Information Bars - Planmeca PlanMill 50 S User Manual

9 Control software
Symbol

9.7 Information bars

Item Designation
1 Current position of X axis
2 Current position of Y axis
3 Current position of Z axis
4 Current position of A axis
5 Current position of B axis
6 Current movement speed
7 Current spindle speed
8 Override button "0"
9 Override slide control
10 Override button "100"
11 Override button "140"
12 Override indicator
13 Progress indicator
74 Planmeca PlanMill 50 S
Designation
Navigation arrow (ten
steps down)
Cancel
Confirm
Description
Displays the current position of the X axis.
Displays the current position of the Y axis.
Displays the current position of the Z axis.
Displays the current position of the A axis.
Displays the current position of the B axis.
Shows the current movement speed.
Displays the current rotational speed of the spindle.
The override value is set to 0%. This results in an axis
standstill.
Using the slide control it is possible to manually change the
override value. It is also possible to change the override
during program processing.
The override value is set to 100%.
The override value is set to 140%.
Shows the current override value setting. When the control
software is started, the override value is set to 100% as
standard.
Shows the progress of the milling program started as a
percentage.
Description
For navigating down through the tool list, ten steps at
a time.
Cancel current modifications without saving.
Confirm changes.
User's manual